Atlas GC Primer

  • Can be used on “GREEN CONCRETE” and existing concrete
  • Is a primer, primer sealer or concrete curing compound
  • Meets ASCM C309 requirements for use as a concrete curing compound
  • Can be applied to concrete without any surface preparation up to 36 hours after finishing (after 36 hours grit blasting is required)
  • Does not need to be removed prior to further treatment
  • Can be brush, roller or spray applied
  • Is compatible with all ATLAS epoxy setting beds, coatings, linings, and floor topping systems
    Download Datasheet

Chempruf Tie Coat

  • Can be brush or roller applied
  • Interfacing primer
  • Designed for bonding new polyester and vinyl ester glass flake coatings or fabric reinforced linings to existing polyester or vinyl ester resin systems
  • Also used as a barrier coat between epoxy or furan resin substrates and Chempruf polyester and vinyl ester resin systems

Download Datasheet

Chempruf VE Primer

  • Can be brush or roller applied
  • Requires grit blasting or acid washing surface prep in order to achieve a tenacious bond
  • Is a primer compatible with all ATLAS vinyl ester and polyester systems

Download Datasheet

Rezklad E-Concrete Primer

  • Can be brush or roller applied
  • Requires grit blasting or acid washing surface prep in order to achieve a tenacious bond
  • Is a primer compatible with all ATLAS epoxy setting beds, coatings, linings, and floor topping systems
  • LT formulation available for low temperature application to 34°F

Download Datasheet

Rezklad E-Concrete Primer MT

  • Can be used on new concrete after 5 days cure time.
  • Can be used on existing damp concrete, simply remove standing water.
  • Can be brush or roller applied.
  • Requires grit blasting or acid washing surface prep in order to achieve a tenacious bond.
  • Is a primer compatible with all ATLAS epoxy setting beds, coatings, linings, and floor topping systems.
    Download Datasheet