CCM—Linings & Membranes

Thermoplastic Linings

Anchor-Lok Lining System

  • Used in conjunction with concrete construction
  • Mechanically anchored into concrete substrate
  • Leak-free primary and second containment and corrosion protection
  • Leak detection systems available
  • Expansion joints not required
  • Available in five thermoplastic resins
  • Chemical resistance
  • Thermal resistance
  • Impact and abrasion resistant
  • Bridges cracks in concrete
  • Easy installation
  • On-site new construction
  • Prefabricated construction available for new construction or retrofit
  • Trenches, Sumps, Tanks, Drains
  • Any configuration size or shape
  • Built-in grating seat
  • Conform to ASTM and DIN standards
  • Welded by Certified Applicators
  • Standard sheet thicknesses are 1/8″ (3 mm.) and 3/16″ (5 mm.)

i beams structur

Download Datasheets:

Anchor-Lok Lining System
Installation Guidelines
Chemical Resistance Charts


Spray

1/8″ to 3/16″ spray applied systems

spray1

Spray machine available for rent – Operating instructions available click here for them

Rezklad E-125S AR

  • Hybrid epoxy system
  • Ideal for lift stations, wet wells, manholes, clarifiers, digesters, grit chambers and other waste and water treatment structures.
  • Can be used for floors, walls, ceilings, sumps, trenches and containment in a variety of industries.
  • Sprayed vertically at thicknesses greater than 60 mils in one application.
  • Resistant to many acids, alkalies, salts, oils, greases, food by-products.
  • Resistant to 20% hydrochloric acid, 50% sulfuric acid and 25% phosphoric acid. It demonstrates excellent resistance to Hydrogen
  • Sulfide and prevents microbial induced corrosion.
  • Installed exclusively by ATLAS authorized applicators.
    Download Datasheet

Rezklad E-135S

  • Epoxy novolac resin, high solids
  • 98% sulfuric acid, concentrated hydrochloric and phosphoric acids, 20% nitric acid, 30% chromic acid
  • Organic solvents, dilute alkalies, alkaline hypochlorite solutions, dilute organic acids
  • USDA certifiable
    Download Datasheet

Rezklad E-135SC

  • Epoxy novolac resin, high solids, carbon filled Rezklad E-135S
  • 70% hydrofluoric acid, fluoroboric acid, fluorides, 50% sodium hydroxide, hydrofluoric/nitric acid blends
  • USDA certifiable
    Download Datasheet

Thermoset Resin Linings

Chempruf Lining Systems

Chempruf Drawings are available for additional information.

Chempruf 100 Series

  • Suitable for immersion
  • Fiberglass flake reinforced, hi-build coatings
  • 20 to 60 mil final thickness
  • Brush, roller or spray applied
  • USDA certifiable

chempruf100
Download Datasheets:

Chempruf 120 Bisphenol Epoxy
Chempruf 121 Novolac Epoxy
Chempruf 130 Chlorendic Anhydride Polyester
Chempruf 141 Novolac Vinyl Ester
Chemical Resistance Charts

Chempruf 1000 Series

  • Fiberglass flake reinforced linings
  • Suitable for immersion
  • 60 to 100 mil final thickness
  • Applied to concrete or steel substrates
  • USDA Certifiable

chempruf1000
Download Datasheets:

Chempruf 1300 Chlorendic Anhydride Polyester
Chempruf 1410 Novolac Vinyl Ester
Chemical Resistance Charts

Chempruf 2001 Series

  • Fiberglass mat reinforced linings
  • Suitable for severe thermal and chemical conditions
  • 1/8″ final thickness
  • Applied to concrete or steel substrates
  • For fluorides and high alkaline environments, Chempruf 2201 C and 2211 C are available.
  • For abrasive slurries and high velocity air containing particulates, use Chempruf 2001 AO Series
  • USDA certifiable

chempruf2001
Download Datasheets:

Chempruf 2101 & 2102 Furfuryl Alcohol
Chempruf 2201 Bisphenol Epoxy
Chempruf 2211 Novolac Bisphenol F Epoxy
Chempruf 2301 Chlorendic Anhydride Polyester
Chempruf 2411 Novolac Vinyl Ester
Chemical Resistance Charts

Chempruf 2000 Series

  • Multiple layers of fiberglass mat reinforced linings
  • Suitable for severe thermal and chemical conditions
  • 1/8″ final thickness
  • Applied to concrete or steel substrates
  • USDA certifiable

chempruf2000
Download Datasheets:

Chempruf 2300 Chlorendic Anhydride Polyester
Chempruf 2410 Novolac Vinyl Ester
Chempruf 2420
Chemical Resistance Charts


Membranes

Used in conjunction with brick and mortar to provide secondary layer of protection. For more information on brick and tile floor construction, click here.

 

Atlastic 40

  • Hot applied, modified asphaltic
  • Maximum temperature at brick / membrane interface is 150°F (66°C)

alastic40
Download Datasheet

Atlastic 50

  • Hot applied, modified asphaltic
  • Maximum temperature at brick / membrane interface is 190°F (88°C)
    Download Datasheet

Atlastic 55 Sheet

  • Fabric reinforced modified asphaltic sheet
  • High temperature membrane for process vessels
  • Chlor-alkali, phosphoric, sulfuric, fertilizer and pigment processing industries
  • With proper design, process temperatures up to 325°F (163°C)
    Download Datasheet

Atlastic CT-30 Membrane

  • Trowel applied, modified asphaltic
  • Used with masonry brick construction, as a cleavage or waterproofing membrane
  • Low odor
  • Flexible from -10°F (-24°C) to 150°F (66°C)
    Download Datasheet

Membrane 88

  • Trowel applied, room temperature curing, urethane elastomer
  • Pulp and paper industry
  • Used with masonry brick construction, as a cleavage or waterproofing membrane
  • Resistant to temperatures up to 170°F (77°C)
  • Good for horizontal and vertical surfaces
    Download Datasheet

AFM-WM Waterproofing Membrane

  • 40 mil anti-fracture membrane
  • Withstands cracks up to 1/4″
  • Fabric-faced and reinforced
  • “Peel-n stick” sheet/rolls
  • Excellent for patch and repair work
    Download Datasheet