- Bond coat for brick and tile over Portland Cement concrete, sand cement, and latex or epoxy modified leveling bed
- Low temperature application available to 34°F (1°C)
Dairy
The product systems provided here are typically installed in these areas. Consult Atlas for product system verification based on specific project operating conditions.
Rezklad E-HP
- Epoxy novolac resin
- Apply to damp concrete
- Does not support bacteria growth
- Hydrochloric acid, phosphoric acid, 98% sulfuric acid, 30% nitric acid and 30% chromic acid
- Dilute organic acids, alkalies, organic solvents
- Low temperature application to 45°F (7°C)
- USDA certifiable
Download Datasheet
Rezklad E-AP
- Epoxy resin
- Economical, all-purpose floor topping
- Splash and spills of non-oxidizing acids, alkalies, salts, oils, food chemicals Hand or power trowel applied
Download Datasheet
Rezklad E-Flooring Compound
- Epoxy resin
- Splash and spills of non-oxidizing acids, alkalies, salts, oils, food chemicals Low temperature application available to 34°F (1°C)
Download Datasheet
Rezklad E-HiBuild 90
- Epoxy resin, high solids
- Acids, alkalies, salts, oils, food chemicals
- Brush, roller or spray applied
- 10-125 mil thickness
- Apply over concrete, steel or polymer floor
- USDA certifiable
Download Datasheet
Furnane Floors
Used by the food, beverage pharmaceutical and electronic industries for chemical and thermal resistance in combination with sanitary regulations and esthetics.
- Direct bond system
- Masonry Units are bonded to the substrate with Red Furnane Setting Bed
- An Atlas Grout or Mortar is used to fill the joints
- The system can be installed using either the Tilesetter’s Method or the Bricklayers’s Method
Furathane Grout
- Furan resin
- Caustic and acidic sanitizers
- Resistant to 350°F (177°C)
- ASTM C658, ANSI A118.5 compliant
- USDA certifiable
Rezklad HP Grout
- Epoxy novolac resin
- Organic and inorganic acids and alkalies, solvents
- Does not support bacteria growth
- Water washable application
- Low temperature application to 45°F (7°C)
- ASTM C658, ANSI A118.3 compliant
- USDA certifiable
Rezklad Water Washable Grout
- Epoxy resin
- Dilute acids, alkalies, salts, many cleaning agents
- Low temperature application available to 34°F (1°C)
- ASTM C658, ANSI A118.3 compliant
- USDA certifiable