CCM - Linings and Membranes
THERMOPLASTIC LININGS - ANCHOR-LOK®
Anchored Thermoplastic Lining for Concrete Protection
ANCHOR-LOK® mechanically locks into concrete structures to provide unmatched corrosion resistance. ANCHOR-LOK reduces construction time, eliminates concrete cure and surface preparation, and provides verified pinhole and leak-free integrity throughout the lining system.
The chemical and thermal resistance of Anchor-Lok Thermoplastic Lining Systems surpasses a variety of requirements for the protection of concrete structures regardless of size and configuration. ANCHOR-LOK sheet is available in various grades of Polyethylene (PE), Polypropylene (PP), Polyvinyl Chloride (PVC) and Polyvinylidene Fluoride (PVDF).
ANCHOR-LOK Applications
ANCHOR-LOK is used in conjunction with concrete to contain and convey a wide variety of chemical solutions.
ANCHOR-LOK has excellent chemical, thermal and abrasion resistance and withstands external hydraulic pressure well in excess of a 100 ft. (30 m.) head.
ANCHOR-LOK is available in UV-resistant grades for outdoor applications. Systems meeting USDA and FDA service requirements are available.
ANCHOR-LOK is used to line concrete:
-
Trenches
-
Sumps
-
Pits
-
Tanks
-
Basins
-
Containment dikes
-
Manholes and piping
-
Underground storage vaults
-
Neutralization tanks
-
Flumes and chute linings for wet or dry applications
-
Chemical process structures
-
Storage tanks
-
Waste treatment structures
-
Municipal sewage and water treatment tanks
-
Clarifiers
-
Digesters
-
Tank farms
-
Pump pads
-
Specialty industrial flooring
-
Concrete ducts and stacks
-
Offshore and shore side concrete marine pilings
-
Walls
-
Any structure that can formed in concrete can be lined with Anchor-Lok
Features and Benefits of ANCHOR-LOK
ANCHOR-LOK has many features and benefits to meet your needs:
-
Used in conjunction with conventional concrete construction
-
Mechanically anchored into concrete substrate
-
Leak-free primary and secondary containment
-
Leak detection systems available
-
Expansion joints are not required
-
Available in several thermoplastic resins
-
Outstanding chemical resistance
-
Broad thermal resistance
-
Impact and abrasion resistant
-
Bridges cracks in concrete
-
Easy installation
-
On-site new construction
-
Prefabricated construction available for new construction or retrofit
-
Any configuration, size, or shape
-
Built-in grating seat and flange as required
-
Conforms to ASTM and DIN standards
-
Welded by Certified Applicators
-
Standard sheet thicknesses are 1/8″ (3 mm.) and
3/16″ (5 mm.)
SAMPLE PROJECTS
